Attribute | ME60-X16A | ME60-X8A | ME60-X16 | ME60-X8 | ME60-X3 |
Switching Capacity | 50.32 Tbit/s | 25.16 Tbit/s | 12.58 Tbit/s | 7.08 Tbit/s | 1.08 Tbit/s |
Forwarding Performance | 11,520 Mpps | 5,760 Mpps | 5,760 Mpps | 2,880 Mpps | 360 Mpps |
Number of Slots | 22 slots, including 16 LPUs, 2 SRUs, and 4 SFUs | 12 slots, including 8 LPUs, 2 SRUs, and 2 SFUs | 22 slots, including 16 LPUs, 2 SRUs, and 4 SFUs | 11 slots, including 8 LPUs, 2 SRUs, and 1 SFU | 5 slots, including 3 LPUs and 2 SRUs |
Dimensions (H x W x D) | 1,778 mm x 442 mm x 650 mm (40U) | 934 mm x 442 mm x 650 mm (21U) | 1,420 mm x 442 mm x 650 mm (32U) | 620 mm x 442 mm x 650 mm (14U) | 175 mm x 442 mm x 650 mm (DC 4U); 220 mm x 442 mm x 650 mm (AC 5U) |
Maximum Power Consumption | 7,220W (BSUF-240) 9,040W (BSUF-480) | 4,110W (BSUF-240) 4,770W (BSUF-480) | 4,610W (BSUF-100) 6,210W (BSUF-240) | 2,340W (BSUF-100) 3,220W (BSUF-240) | 920W (BSUF-100) |
Full Configuration Weight | 356 kg | 190 kg | 279 kg | 136 kg | DC: 42 kg (100G) AC: 52 kg (100G) |
Interface Types | 100 GE-WAN/LAN 10 GE-WAN/LAN GE/FE |
BRAS | User access protocols: PPPoE, IPoE, 802.1X, and ND access User authentication protocols: PAP, CHAP, MSCHAP, RADIUS, and HWTACACS User billing protocols: RADIUS, HWTACACS, and COPS User authorization protocols: RADIUS, HWTACACS, and COPS Policy protocols: COPS, COA |
L2TP | Maximum number of sessions supported: 64K per slot and 128K per device Maximum number of tunnels supported: 16K per slot, 16K per LAC device, and 48K per LNS device |
IPv4 | Supports the static routing protocol and dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP-4. All ports support line-rate forwarding even in complex routing environments, for example, when route flapping occurs |
IPv6 | Supports the following: · IPv4/IPv6 dual stacks · A variety of IPv4-to-IPv6 transition technologies: Manually configured tunnels, IPv6 over IPv4 tunnels, GRE tunnels, IPv4 over IPv6 tunnels, and IPv6 Provider Edge (6PE) · IPv6 static routes and dynamic routing protocols, such as BGP4/BGP4+, RIPng, OSPFv3, and IS-ISv6 · IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, tracert IPv6, socket IPv6, static IPv6 DNS, IPv6 DNS server, TFTP IPv6 client, and IPv6 policy-based routing · Network Address Translation IPv6-to-IPv4 (NAT64), NAT44 and Dual-Stack Lite (DS-Lite) Internet Control Message Protocol Version 6 (ICMPv6) Management Information Base (MIB), User Datagram Protocol Version 6 (UDP6) MIB, TCP6 MIB, and IPv6 MIB |
MPLS/MPLS VPN | Supports the following: · MPLS TE and MPLS/BGP VPN in compliance with RFC 2547bis · Inter-AS Option A, inter-AS Option B, and inter-AS Option C · Integration with Internet services · Martini MPLS L2VPN and Kompella MPLS L2VPN · VPLS and VLL · Heterogeneous interworking Multicast VPN |
Layer 2 Features | Supports the following: · Protocols such as IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1D, IEEE 802.1w, and IEEE 802.1s · VLAN aggregation (super VLAN) Filtering list based on MAC addresses and ports |
Value-added Service | · Supports Destination Address Accounting (DAA), which helps carriers identify services based on destination network segments and perform separate accounting for different services on IP bearer networks Supports Enhanced Dynamic Service Gateway (EDSG), which identifies various user services based on traffic destination addresses and implements independent rate limit, accounting, and management for each service |
Operating Environment | Long-term operating temperature: 0°C to 45°C |
Short-term operating temperature: –5°C to 55°C |
Long-term operating humidity: 5% to 85% |
Short-term operating humidity: 0% to 100% |
Operating altitude: Equal to or below 4,000m |